Owning a car is one of the most exciting things but comes with responsibilities. For example, you will need to clean it on a regular basis, and admittedly, this is not the nicest experience for most people. Even though you can take your car to an automatic car wash for cleaning, it makes sense to do it yourself once in a while. A DIY ensures you scrub the parts as much as you want, and you have every cleaning solution you will need. This helps you in saving money in the long run. Nevertheless, cleaning the car yourself can be challenging. You need to know how to do it, the most important parts to clean, and the right tools you need to have. If you are stuck on how to do it, there is nothing to worry about. This article has created a guide to help you properly wash your car.
Gather the Right Products
The first and foremost thing you should do is gathering the right cleaning products. You need to have a hosepipe, a source of water, and buckets. It is crucial that you ensure you are using the correct products considering that the wrong ones could damage the paint or scratch the surface. In short, have the following products;
- Buckets
- Hosepipe
- Brush
- Microfiber towels
- A wash mitt
- Washing soap
- Wax
- Glass cleaner
- Detailing spray.
Start by Hosing Off the Entire Car
Before you start the cleaning process, you will need to hose off the car first. Start by hosing from the top going to the bottom since most dirt is usually on the bottom part. If you are using a pressure washer, make sure you know how to handle it since too much pressure could ruin the paint.
Wash the Wheels First
On the next step, take your wheel scrubber and soap and start scrubbing the wheels. Make sure you clean the front part and the barrels to remove the dirt and oil that has accumulated over time. After scrubbing them properly, use the hose to rinse them off.
Clean the Engine Bay
If you are doing deep cleaning, then you may have to get to the bonnet. The engine is the most crucial part of the car, and you need to keep it as clean as possible. However, this is a delicate part, and you must have the know-how of cleaning the engine. It is advisable to avoid using the pressure washer on the engine bay since it could damage the electric parts.
Clean Panel by Panel
When cleaning the surface, make sure you do it part by part. Start with the top going to the bottom and don’t forget the windows too. Use the right glass cleaner and a microfiber towel to clean off the windows.
Dry and Wax the Car
After you have done everything described above and you are satisfied that your car I clean, start drying it with microfiber towels. Don’t do it in a circular motion. Put the towel on the surface and drag it instead. You can then use car wax to keep your car shiny.
Conclusion
Cleaning the car yourself does not have to be a difficult task. As long as you have the right cleaning products and follow the instructions above, you are ready to go. So, if you want to wash your car like a pro, use this guide on your next wash.
Leave a Reply